Cudy RE1200 Outdoor AC1200 Gigabit Wireless Access & Extender IP65 Water Proof Gigabit RJ45 PoE Adapter Included

Outdoor AC1200 Gigabit Dual Band Access Point with MU-MIMO. Designed with the latest 802.11ac Wave 2 technology, Cudy AP1300 can reliably delivers dual band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz to multiple devices simultaneously. Designed with one gigabit ethernet port, AP1300-Outdoor can delivers up to 1000Mbps ethernet speed to wired devices.
5-IN-1 Multifunctional Wireless Access Point. AP1300 outdoor is not only an outdoor wireless access point, it can also work as an outdoor WiFi Extender, Gigabit Outdoor WiFi Router, Gigabit Outdoor WISP Router or Gigabit Mesh Router. You can configure the operating mode to meet your requirement.
RP-SMA interface and detachable WiFi antennas. 2 external 5dBi WiFi antennas enhance the sensitivity of the router and improve the signal quality of WiFi. At the same time, the WiFi antenna is a detachable design. If you want to use other high gain outdoor antennas, the RP-SMA connector also provides the possibility of an external cellular antenna.
IP65 rated waterproof housing and 4KV lightning protection design, suitable for outdoor use. Pole or wall mount for easy installation in your yard, shop, farm or RV.
Multiple Power Options for Easy Installation. AP1300 Outdoor supports 802.3at/af PoE or 24~50V passive power supply ( adapter included ), can be either powered by a PoE switch or PoE Injector adapter, making deployment effortless and flexible

Not yet rated Write a review

Availability:: In Stock
Product Code:: RE1200 Outdoor
Brand:: CUDY

JOD 35.00 JOD 30.00

You save JOD 5.00

Chat with us on Whatsapp

Free delivery on orders Over 100 JOD
Cash on Delivery

Qty

Add to Wish List

Compare this Product

Product Description

Speedy Dual-Band AC1200 Wi-Fi

With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.

Boosted Wi-Fi Coverage with Beamforming

Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.

Works in Rain, Thunder, Dust, Heat, Cold

The AP is protected by an IP65 standard case, shielding it from rain and dust when installed vertically. It also features 4 kV Lightning/Surge and 8 kV ESD protection for higher reliability in thunderstorms. Its working temperatures span from -40 °F to 149 °F (-40 ℃ to 65 ℃).

Mesh Networks

Seamless Roaming for Smooth Wi-Fi Experience

Enhance the Wi-Fi experience for your visitors by implementing a unified Wi-Fi name across your entire premises. With mesh technology, enjoy uninterrupted roaming as clients seamlessly connect to the strongest available Wi-Fi node without manual switching.

Plug-and-Play Mesh Installation

Simply Plug and Unplug for Mesh Setup

Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)

Leave the Rest to Adaptive Routing

Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.

Guide to Wiring and Physical Installation

Gigabit Port with Two PoE Options

Supports two powering methods—

802.3at/af PoE (Max power: 11 W, Idle: 7.5 W)
24-57 V Passive PoE (Adapter included, not waterproof)

If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.