Tripp Lite SmartPro 3kVA Line Interactive
Tripp Lite SmartPro 3kVA Line Interactive UPS, Extended-run & SNMPWEBCARD options, Tower, USB, Serial, EPO, 230V
Share Product
- Availability:
- Out Of Stock
- Product Code:
- SMARTINT3000VS
- Brand:
- Tripp Lite
JOD 490.00
JOD 568.00
You save JOD -78.00
Chat with us on Whatsapp
-
Free delivery on orders Over 100 JOD
-
Cash on Delivery
OUTPUT | |
---|---|
Output Volt Amp Capacity (VA) | 3000 |
Output kVA capacity (kVA) | 3 |
Output Watt Capacity (watts) | 2250 |
Output kW capacity | 2.2 |
Output power factor | 0.8 |
Nominal Output Voltage(s) Supported | 220V; 230V; 240V |
Nominal Voltage details | 230v nominal inverter output voltage |
Frequency compatibility | 50 / 60 Hz |
Output voltage regulation (line mode) | -19% +8% |
Output voltage regulation (Battery mode) | +/- 5% |
Built-in UPS output receptacles | 8 C13 outlet(s); 1 C19 outlet(s) |
Included output power cables | Includes 3 C13 to C14 output power cables |
Built-in controllable switched load banks | Three switchable two-outlet C13 load banks |
Output circuit breaker | 10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered |
Output AC waveform (AC mode) | Sine wave |
Output AC waveform (battery mode) | PWM sine wave |
INPUT | |
Rated input current (at maximum load) | 15.4A |
Nominal Input Voltage(s) Supported | 230V AC |
UPS input connection type | C20 inlet |
UPS input connection description | IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles |
BATTERY | |
Full load runtime (minutes) | 4 min. (2250w) |
Half load runtime (minutes) | 14 min. (1125w) |
Expandable battery runtime | Extended runtime supported via optional external battery packs |
External battery pack compatibility | BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible) |
DC system voltage (VDC) | 48 |
Battery recharge rate (included batteries) | Less than 4 hours from 10% to 90% |
Replacement battery cartridge (internal UPS battery replacement) | RBC54 |
Battery Access | Battery access door |
Battery replacement description | Hot-swappable, user replaceable batteries |
VOLTAGE REGULATION | |
Voltage regulation description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 282V |
Overvoltage correction | Input voltages between 245 and 282 are reduced by 12% |
Undervoltage correction | Input voltages between 177 and 199 are boosted by 14% |
Severe undervoltage correction | Input voltages between 151 and 176 are boosted by 30% |
LEDS ALARMS & SWITCHES | |
LED Indicators | 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
Alarms | Audible alarm indicates power-failure, overload and low-battery conditions |
Alarm cancel operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status |
Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation |
SURGE / NOISE SUPPRESSION | |
UPS AC suppression joule rating | 480 |
UPS AC suppression response time | Instantaneous |
EMI / RFI AC noise suppression | Yes |
PHYSICAL | |
Installation form factors supported with included accessories | Tower |
Primary form factor | Tower |
UPS / Power Module dimensions in primary form factor (height x width x depth / inches) | 14.2 x 9.2 x 12 |
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) | 36.2 x 23.5 x 30.5 |
UPS / Power Module weight (lbs) | 61 |
UPS / Power Module weight (kg) | 27.7 |
UPS Shipping dimensions (height x width x depth / inches) | 16 x 14.8 x 19.8 |
UPS Shipping dimensions (height x width x depth / cm) | 40.6 x 37.5 x 50.2 |
Shipping weight (lbs) | 67.5 |
Shipping weight (kg) | 30.6 |
Cooling method | Fan |
UPS housing material | Polycarbonate |
ENVIRONMENTAL | |
Operating Temperature Range | +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius |
Storage Temperature Range | +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
Relative Humidity | 0 to 95%, non-condensing |
AC mode BTU / hr. (full load) | 488.3 |
Battery mode BTU / hr. (full load) | 1143.1 |
Audible Noise | Audible Noise < 47dBA At Front Side 1 Meter |
COMMUNICATIONS | |
Network monitoring port description | Supports detailed monitoring of UPS and site power conditions |
PowerAlert software | Included |
Communications cable | 2 USB and 2 DB9 cables included |
WatchDog compatibility | Supports Watchdog application, OS and hard-reboot restart options for remote applications |
LINE / BATTERY TRANSFER | |
Transfer time | 2-4 milliseconds |
Low voltage transfer to battery power (setpoint) | 151 |
High voltage transfer to battery power (setpoint) | 282 |
SPECIAL FEATURES | |
Cold Start (startup in battery mode during a power failure) | Cold-start operation supported |
High availability UPS features | Hot swappable batteries |
Green & high efficiency features | Individually controllable load banks |
CERTIFICATIONS | |
UPS Certifications | CE |
UPS Certification details | CE 62040 |